Products | Polycoat Products

Tel: 562.802.8834

Home > Products

Sort By:

PC-50 is a single component, proprietary liquid thickener/ accelerator for Polycoat Products base membranes. This accelerator enhances the moisture curing characteristics that accelerates the cure time and causes the coating to thicken.

PC-50 Thickener/Accelerator

PC-550 Catalyst is a single component, proprietary, liquid organometallic catalyst that reduces the cold weather cure time of aromatic polyurethane polyurea coatings. PC-550 Catalyst is added to PC-550SC.

PC-550 Catalyst

PC-Drain and PC-Drain HD are two-part prefabricated geocomposite drains consisting of a formed polystyrene core covered on one side with polypropylene filter fabric. The fabric allows water to pass into the drain core while restricting the movement of soil particles which might clog the core.

PC-Drain

Poly-Caulk® 50A is is two-component, 1:1 ratio, aromatic, rapid setting, self leveling, polyurea polyurethane, 50 Shore A caulking compound for interior application.

Poly-Caulk® 50A

Poly-Caulk® 82 is a two-component aromatic, 1:1 ratio, rapid setting, self-leveling, 100% solids polyurea caulking compound for interior and exterior horizontal application

Poly-Caulk® 82

Poly-Caulk® HM (Hand-Mix) is a two component, modified aliphatic, rapid setting, self-leveling, 100% solids polyurea caulking compound.

Poly-Caulk® HM

Poly-Caulk® JF-75 is a self-leveling, 100% solid, aromatic two-component polyurea joint filler. Poly-Caulk® JF-75 is designed for 15-25% movement of an installed joint width.

Poly-Caulk® JF-75

Poly-Caulk® JF-85 is a self-leveling, 100% solid, aromatic two-component polyurea joint filler. Poly-Caulk® JF-85 is designed for 15-25% movement of an installed joint width.

Poly-Caulk® JF-85

Poly-Caulk® JS-45 is a self-leveling, 100% solid, two-component modified polyurea-based elastomeric joint sealant. Poly-Caulk® JS-45 is a flexible material that is designed for 25% movement of an installed joint width.

Poly-Caulk® JS-45

Poly-Caulk® JS-60 is a self-leveling, 100% solid, two-component modified polyurea-based elastomeric joint sealant. Poly-Caulk® JS-60 is a flexible material that is designed for 25% movement of an installed joint width.

Poly-Caulk® JS-60

Poly-Caulk® PX 15GG is an elastomeric, low-modulus, one component, moisture-curing, non-sag, polyurethane sealant. The product requires no mixing and typically requires no priming to bond to many materials, including concrete and masonry.

Poly-Caulk® PX 15GG

Poly-Caulk® PX15 SL is an elastomeric, one-component, self-leveling, non-bubbling, premium-grade polyurethane sealant specifically developed to be used as a multi-purpose horizontal joint sealant. The product is a moisture cure sealant with excellent adhesive properties and resistance to aging and weathering.

Poly-Caulk® PX15 SL

Poly-Caulk® PX27GG (Gun Grade) is a two component, 1:3 (A:B) ratio by volume, non-sag, high solids polyurethane sealant.

Poly-Caulk® PX27GG

Poly-Caulk® PX27SL (Self-Leveling) is a two component, 1:1 (A:B) ratio by volume, 100% solids polyurethane sealant.

Poly-Caulk® PX27SL

Polycoat Fabric-40 is a 100% polyester reinforcement, stitch bond 2.98 oz. fabric used in deck coating systems, urethane and all other elastomeric, liquid-applied coatings. Polycoat Fabric-40 adds tremendous strength and reinforcement to any elastomeric liquid-applied coating system.

Polycoat Fabric-40

Polyester Tape is a spun-bonded, non-woven, polyesterweb tape. Polyester Tape is used in many Polydeck® Decking Systems.

Polyester Tape

Polyglaze® AR/Poly-I-Gard™ 246 Catalyst is a single component, proprietary, liquid organometallic catalyst that reduces the cold weather cure time of Polyglaze® AR or Poly-I-Gard™ 246.

Polyglaze® AR/Poly-I-Gard™ 246 Catalyst

Polyglaze® Hardener is a single component, low viscosity, accelerating agent. This accelerator enhances the moisture curing characteristics of all grades of Polyglaze® coatings and all grades of the Poly-I-Gard™ 246 coatings.

Polyglaze® Hardener

Build a
Submittal

Request
a Quote