Products | Polycoat Products

Tel: 562.802.8834

Home > Products

Sort By:

Metal Primer 130 is a two-component, liquid-applied, urea polyurethane primer. Polycoat Products manufactures products in different VOCs ranging from 100 to 340 grams/liter to comply with VOC requirement in various regions.

MetalPrimer 130

PC-220/PC-220SC is a single-component, liquid-applied, moisture-cured aromatic polyurethane elastomeric waterproofing base membrane. PC-220SC is designed for use in Southern California to be in compliance with SCAQMD air quality standards.

PC-220 / 220SC

PC-220 Vertical is a single-component, liquid-applied, moisture-cured aromatic polyurethane elastomeric waterproofing base membrane.

PC-220 Vertical

PC-220PL is a single-component, liquid-applied, moisture-cured aromatic primerless polyurethane elastomeric waterproofing base membrane. PC-220PL is designed for use in Southern California to be in compliance with SCAQMD air quality standards.

PC-220PL

PC-220SF is a single-component, high-solids, low-odor, solvent-free, environmentally safe, liquid-applied, moisture-cured aromatic polyurethane elastomeric weatherproofing base membrane.

PC-220SF

PC-235/235SC is a single-component, liquid-applied, moisture-cured aromatic polyurethane elastomeric waterproofing base membrane. Make sure to use the correct grade of product that complies with VOC regulations.

PC-235/235SC

PC-260 is a two-component, fast-setting, fast-curing, solvent-free, flexible, high-performance, and high-solids polyurethane elastomeric coating that can be applied to suitably prepared interior or exterior concrete, plywood and metal surfaces. Due to its fast gel time, PC-260 is suitable for applications in temperatures as low as 20°F (-6°C).

PC-260

PC-280 is a two-component, rapid-setting, rapid-curing, solvent-free, flexible, high-performance, and high-solids polyurethane elastomeric coating that can be applied to suitably prepared interior or exterior concrete, plywood and metal surfaces.

PC-280

PC-440/440SC is a single-component, liquid-applied, moisture-cured aromatic polyurethane elastomeric waterproofing base membrane, designed for use in most areas of California to be in compliance with air quality standards. Make sure to use the correct grade of product that complies with VOC regulations.

PC-440/440SC

PC-440SF is a single-component, high-solids, low-odor, solvent-free, environmentally safe, liquid-applied, moisture-cured aromatic polyurethane elastomeric waterproofing base membrane.

PC-440SF

PC-50 is a single component, proprietary liquid thickener/ accelerator for Polycoat Products base membranes. This accelerator enhances the moisture curing characteristics that accelerates the cure time and causes the coating to thicken.

PC-50 Thickener/Accelerator

PC-550 Catalyst is a single component, proprietary, liquid organometallic catalyst that reduces the cold weather cure time of aromatic polyurethane polyurea coatings. PC-550 Catalyst is added to PC-550SC.

PC-550 Catalyst

PC-550SC is a single-component, water-catalyzed polyurethane polyurea, liquid-applied elastomeric waterproofing base membrane.

PC-550SC

PC-Drain and PC-Drain HD are two-part prefabricated geocomposite drains consisting of a formed polystyrene core covered on one side with polypropylene filter fabric. The fabric allows water to pass into the drain core while restricting the movement of soil particles which might clog the core.

PC-Drain

Poly-Caulk® 50A is is two-component, 1:1 ratio, aromatic, rapid setting, self leveling, polyurea polyurethane, 50 Shore A caulking compound for interior application.

Poly-Caulk® 50A

Poly-Caulk® 82 is a two-component aromatic, 1:1 ratio, rapid setting, self-leveling, 100% solids polyurea caulking compound for interior and exterior horizontal application

Poly-Caulk® 82

Poly-Caulk® HM (Hand-Mix) is a two component, modified aliphatic, rapid setting, self-leveling, 100% solids polyurea caulking compound.

Poly-Caulk® HM

Poly-Caulk® JF-75 is a self-leveling, 100% solid, aromatic two-component polyurea joint filler. Poly-Caulk® JF-75 is designed for 15-25% movement of an installed joint width.

Poly-Caulk® JF-75

Build a
Submittal

Request
a Quote