Poly-I-Gard® E-7097
Poly-I-Gard E-7097 is a two component, 1:1 ratio, 100% solids, low modulus, low viscosity, moisture tolerant, rapid setting, single or multi- step semi-rigid epoxy adhesive and epoxy binder. Formulated for use in bonding skid resistant materials to hardened asphalt and concrete, as a binder in epoxy mortars. VOC complaint in all States and Provinces in North America.
Features
- Abrasion
- Chemical and Impact Resistant
- Creates a Below Aggregate Protection Layer to Reduce Water and Water Borne Chemical Intrusion
- Excellent Adhesion
- Low Viscosity and Low Modulus Epoxy Binder
- Mix Ratio 1:1 By Volume for Ease of Use
- Rapid Cure Return to Traffic Formula
- Broadcast Aggregate to Support Preservation and Friction (HFST) Application
- Resin
- Hardener and Aggregate for a Concrete Repair Mortar
- Neat Resin and Hardener to Gravity Filling of Horizontal Cracks
- Cold Weather Formulation Available Upon Request
Typical Uses
- Use as a neat epoxy binder adhesive to bond approved aggregates and/or pavement marking materials to cured asphalt or concrete pavements
- Use as an above grade interior or exterior horizontal crack filler or surface sealer to minimize the intrusion of water and waterborne contaminants
- All aggregates must comply with federal
- state and province for pavement or bridge or elevated highway or park structure specifications
Color
- Clear Light Amber Unpigmented. Poly-I-Gard E-7097 Décor can be dyed, such as Green: Part A ( Blue ) dye & Part B (Yellow) dye indicator.