Products | Polycoat Products

Tel: 562.802.8834

Home > Products

Sort By:

PC-235/235SC is a single-component, liquid-applied, moisture-cured aromatic polyurethane elastomeric waterproofing base membrane. Make sure to use the correct grade of product that complies with VOC regulations.

PC-235/235SC

PC-260 is a two-component, fast-setting, fast-curing, solvent-free, flexible, high-performance, and high-solids polyurethane elastomeric coating that can be applied to suitably prepared interior or exterior concrete, plywood and metal surfaces. Due to its fast gel time, PC-260 is suitable for applications in temperatures as low as 20°F (-6°C).

PC-260

PC-280 is a two-component, rapid-setting, rapid-curing, solvent-free, flexible, high-performance, and high-solids polyurethane elastomeric coating that can be applied to suitably prepared interior or exterior concrete, plywood and metal surfaces.

PC-280

PC-440/440SC is a single-component, liquid-applied, moisture-cured aromatic polyurethane elastomeric waterproofing base membrane, designed for use in most areas of California to be in compliance with air quality standards. Make sure to use the correct grade of product that complies with VOC regulations.

PC-440/440SC

PC-440SF is a single-component, high-solids, low-odor, solvent-free, environmentally safe, liquid-applied, moisture-cured aromatic polyurethane elastomeric waterproofing base membrane.

PC-440SF

PC-50 is a single component, proprietary liquid thickener/ accelerator for Polycoat Products base membranes. This accelerator enhances the moisture curing characteristics that accelerates the cure time and causes the coating to thicken.

PC-50 Thickener/Accelerator

PC-550 Catalyst is a single component, proprietary, liquid organometallic catalyst that reduces the cold weather cure time of aromatic polyurethane polyurea coatings. PC-550 Catalyst is added to PC-550SC.

PC-550 Catalyst

PC-550SC is a single-component, water-catalyzed polyurethane polyurea, liquid-applied elastomeric waterproofing base membrane.

PC-550SC

PC-Drain and PC-Drain HD are two-part prefabricated geocomposite drains consisting of a formed polystyrene core covered on one side with polypropylene filter fabric. The fabric allows water to pass into the drain core while restricting the movement of soil particles which might clog the core.

PC-Drain

Product SeriesThe PCCNO Series features solid-cast, room-temperature two-component urethane systems with medium-to-high Shore D hardness (60–80 D), formulated for low exotherm and fast demolding (10–15 minutes) to enable efficient, high-throughput casting. The systems are available in natural (tan and white) or customizable pigment colors.

PCCNO Series

Product SeriesThe PCF Series includes a diverse family of two-component polyurethane foam systems designed for both rigid and flexible applications. With formulations spanning Class I fire-retarded rigid foams, resilient cushioning foams, microcellular load-bearing foams, and self-skinning systems, the PCF Series delivers versatility, strength, and reliability for molding, insulation, seating, and specialty applications.

PCF Series

PCF 2151 polyurethane foam systems are designed for molding and void filling applications. PCF 2151-20 can be designed to meet a variety of reactivity requirements without sacrificing product quality and can be formulated to a wide range of densities from 3 to 30 lbs/ft3 The unique handling characteristics of the PCF 2151 series systems provide ease of mixing by hand or machine to produce a uniform product with excellent cell structure.

PCF-2151-20-90S-NATURAL

Product SeriesThe PCNO Series delivers 100% solids, low-odor, two-component urethane systems that cure at room temperature and demold in just 5–8 minutes. Designed for ease of processing and high-performance solid casting, these formulations combine minimal exotherm with rigid Shore D hardness for fast, reliable production.

PCNO Series

PipePro Ultra is a direct‐to‐metal, quick‐set, two component, 100% solids polyurethane designed to protect pipelines from corrosion and abrasion. It is especially formulated for Water Transmission Piping and Piping ID/OD applications.

PipePro Ultra

PipeShield HAR is a direct‐to‐metal, quick‐set, two component, 100% solids polyurethane designed to protect pipelines from corrosion and abrasion. It is especially formulated for Water Transmission Piping and Piping ID/OD applications.

PipeShield HAR

Poly-Caulk® 50A is is two-component, 1:1 ratio, aromatic, rapid setting, self leveling, polyurea polyurethane, 50 Shore A caulking compound for interior application.

Poly-Caulk® 50A

Poly-Caulk® 82 is a two-component aromatic, 1:1 ratio, rapid setting, self-leveling, 100% solids polyurea caulking compound for interior and exterior horizontal application

Poly-Caulk® 82

Poly-Caulk® HM (Hand-Mix) is a two component, modified aliphatic, rapid setting, self-leveling, 100% solids polyurea caulking compound.

Poly-Caulk® HM

Build a
Submittal

Request
a Quote