Products | Polycoat Products

Tel: 562.802.8834

Home > Products

Sort By:

Polyeuro® MPL-90 is a two component, 1:1, 100% solids, fast set, liquid applied, modified polyurea liner system for metal, concrete, fiberglass and wood surfaces.

Polyeuro® MPL-90

Polyglaze® 100/100C/100SC is a polyester, aliphatic, single component, liquid applied, moisture cured, polyurethane topcoat for waterproofing membrane systems.

Polyglaze® 100/100C/100SC

Polyglaze® 302 is an economical, aliphatic, single component, liquid applied, moisture cured, polyurethane surface protection coating.

Polyglaze® 302

Polyglaze® 400/400C/400SC is a polyester, aliphatic, single component, liquid applied, moisture cured, polyurethane topcoat for waterproofing membrane systems. Polycoat Products manufactures products in different VOC’s ranging from 100 to 340 gms/liter to comply with VOC equirements in various regions.

Polyglaze® 400/400C/400SC

Polyglaze® 400FR/400FR-C/400FR-SC is an aliphatic, two component, liquid applied, moisture cured, polyurethane coating. Polycoat Products manufactures products in different VOC’s ranging from 100 to 340 gms/liter to comply with VOC requirements in various regions.

Polyglaze® 400FR/400FR-C/400FR-SC

Polyglaze® AL-50/50SC is an economical, aliphatic, single component, liquid applied, moisture cured, polyurethane coating.

Polyglaze® AL-50/50SC

Polyglaze® AR/AR-OF is an aromatic, one component, liquid applied, moisture cured, polyurethane coating. Polycoat Products manufactures products in different VOC’s ranging from 100 to 340 gms/liter to comply with VOC requirements in various regions.

Polyglaze® AR/AR-OF

Polyglaze® AR/Poly-I-Gard™ 246 Catalyst is a single component, proprietary, liquid organometallic catalyst that reduces the cold weather cure time of Polyglaze® AR or Poly-I-Gard™ 246.

Polyglaze® AR/Poly-I-Gard™ 246 Catalyst

Polyglaze® Hardener is a single component, low viscosity, accelerating agent. This accelerator enhances the moisture curing characteristics of all grades of Polyglaze® coatings and all grades of the Poly-I-Gard™ 246 coatings.

Polyglaze® Hardener

Polyliner 700 is a multifunctional phenol novolac resin that is extremely chemical resistant with a high heat deflection temperature.

Polyliner 700

Polyprime® 172 is a single-component, liquid-applied, aromatic polyurethane polyurea primer. This primer provides excellent intercoat adhesion. Polyprime® 172SC is designed for use in Southern California to be in compliance with SCAQMD air quality standards.

Polyprime® 172/172SC

Polyprime® 21 is a two-component, high solids, liquid applied, epoxy-polyamine primer with unique penetrating characteristics. Polyprime® 21 is ANSI/NSF 61 approved for direct contact with potable water.

Polyprime® 21

Polyprime® 2180/2180SC is a two component, liquid applied, epoxy-polyamine primer with unique penetrating characteristics.

Polyprime® 2180/2180SC

Polyprime® 3042 is a two-component, NSF/ANSI 61-approved, liquid-applied, epoxy primer. This primer has been developed for use on carbon steel, non-ferrous metal, fiberglass, PVC pipe, as well as concrete and masonry.

Polyprime® 3042

Polyprime® EBF-LV is a two-component, high-solids, liquid-applied, epoxy polyamine filler surfacer with unique characteristics for sealing pores in concrete.

Polyprime® EBF-LV

Polyprime® FMB is a clear, two-component,100 percent-solids, low-odor, low-viscosity epoxy primer that is specifically formulated as a moisture-barrier coating to treat new and existing concrete floors with high moisture and high pH. Polyprime® FMB can be used as a one-coat moisture vapor barrier coating suitable for various types of concrete.

Polyprime® FMB

Polyprime® H2O is a three-component, liquid-applied, water-based epoxy primer with low VOC, lowodor, unique penetrating characteristics, and rust-inhibiting properties.

Polyprime® H20

Polyprime® U is a two-component, high-solids, liquid-applied primer with unique penetrating characteristics.

Polyprime® U

Build a
Submittal

Request
a Quote